Hydraulic rotary actuator series MP
category:
Hydraulic cylinders

Hydraulic rotary actuator series MP

Torque [Nm]

0,9-76

Displacement [cm3/rev]

13-62

Pressure [bar]

7-70

Rotac® Hyd-ro-ac® MP Series rotary actuators provide the muscle for countless applications involving lifting, turning, indexing, opening, closing, clamping, mixing, bending, testing, steering, and more. Available in 11 standard sizes, our medium-pressure MP model actuators can provide up to 216,730 in-lbs of torque at 1,000 psi.

Download the product catalog Download
  • Connections of drains will add significant life to the shaft seals. This is highly recommended.
  • Design considerations should be made to limit the axial and radial loading applied to the actuator. Contact factory if axial and/or radial loading must be applied to the actuator. Unapproved axial and/or radial loading will void the actuator’s warranty.
  • External stops must be used to limit shaft rotation for most applications. Using the actuators internal components as rotational stops will cause damage and void the actuators warranty.
  • It is critical that the hydraulic system have pressure relief located in close proximity to the actuator to prevent pressure spikes from damaging the actuator. Micromatic offers Cross Port Relief (CPR) manifolds that can be used with the actuator if the customer’s hydraulic system does not have pressure relief (contact factory for details). Hydraulic pressure spikes will rapidly cause damage and void the actuator’s warranty.
  • It is recommended the hydraulic fluid be filtered to 5 microns or less (maximum of 10 microns).

Ask about the product

En – Krótki tekst zachęcający do kontaktu amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua.

    Call Now Button